每周分享

時間:2015-02-06    瀏覽:829次

今天給大家分享的是2014年4月份 《Journal of Power Sources》上發表的一篇名為:Methanol synthesis from CO2 hydrogenation over La–M–Cu–Zn–O (M = Y, Ce, Mg, Zr) catalysts derived from perovskite-type precursors

 文章摘要如下:

A series of La–M–Cu–Zn–O (M = Y, Ce, Mg, Zr) based perovskite-type catalysts are prepared by sol–gel method and characterized by XRD, BET, TPR, N2O-adsorption, XPS and TPD techniques. The results indicate that all the catalysts exhibit La2CuO4 perovskite structure. The addition of Ce, Mg and Zr lead to smaller particles, lower reduction temperature, higher Cu dispersion, larger amount of hydrogen desorption at low temperature and more amount of basic sites. However, Y has less affects on the physicochemical properties. The catalysts derived from perovskite-type precursors show high selectivity for methanol, which is correlated with the Cuα+ species that exists in the reduced catalysts. More exposed Cu surface area is favorable for high CO2 conversion.

 該文章中材料表征采用的是美國麥克儀器AutoChem 2920

 詳情可參考下面鏈接:

http://www.sciencedirect.com/science/article/pii/S0378775313018648